Caster store-in-lid system. Removable casters are securely stored in lid using Hardigg FastClipÔ mounting plate system. For 5" (127 mm) lids only.

Foam cushioning. To transport non-rackmountable equipment, we custom-design protective foam linings and inserts. Hardigg cushioning systems are available in polyethylene (firmer) and polyurethane (softer) foams. Antistatic versions are also available. This option is a major element in equipping double-lid cases used to transport workstations. 

Handles ( extra or replacement) These 90° stop metal handles are rated to sustain 150 lbs. of lift. Available in zinc-plate yellow-chromate or stainless steel.

Hardigg offers a broad range of standard options for our Rackmount shipping cases. These elements, described below, allow you to adapt our Double-Entry cases to a wide variety of transit applications.

Frame option rack extension – 1/8" wider. Used when extra clearance is necessary, usually to accommodate slides. Requires slotted mounting holes in attaching bezel of equipment to be mounted.   (Not shown)

Keyboard tray. Accommodates standard size keyboard. 24" (610 mm) wide, 12" (305 mm) deep. Attaches to case front catches.

Lid hangers. Used to store lids conveniently on side of case when case is open. A set of four hangers for two lids. This option comes at no extra charge.

Rack frame/shock-mount reinforcement for extra-heavy loads. For rackmount cases with more than 170 lb. (77 Kg) of packaged equipment, sixteen elastomeric shock mounts are used instead of the standard eight. Vertical metal wall stiffeners are added to the case body to retain dimensional control of the two openings and ensure that the covers can easily go back on the case body and latch properly. Four delta lifting/tie-down rings are also installed to provide mechanical lift accessibility.

Rack slides. These compact solid-bearing steel slides may be used to mount equipment directly into rack, or to mount drawers or shelves. Sold in pairs. Available in standard duty, 85 pound capacity.

Shelves – fixed and sliding. Shelves can be removed and customized to accommodate non rackmountable equipment. Also see our standard sized shelves on the Rackmount Accessories page.

Storage pouches. Zippered pouch for storing cables and accessories in front or rear lids. Comes mounted in 5" lids. Three sizes: 10" x 22" x 2.5" (254 x 559 x 63 mm); 16" x 22" x 2.5" (406 x 559 x 63 mm); and 18" x 18" x 2.5" (457 x 457 x 63 mm).

Adjustable side support rails. Two each 2" x 2" x 1/8" (51mm x 51mm x 3mm) aluminum-angle, vertically-adjustable support rails used to support equipment while installing heavy loads.

Bottom support rails. Two each support rails used to support equipment while installing heavy loads.

Dessicator Basket designed to hold MIL-D-3464 bagged desiccant.  Each basket comes complete with spanner nut, washer and retained gasket.  Hole through cover and flange are provided for safety wiring and inspector seal.  Inside dimensions:  3.37 x 12". Outside dimensions: 4.5 dia x 12.75".  Installation hole in container is 4.015" diameter.  Also available in 7.75, 14.75 and 17.75" depths.

Document Holder provides a convienient, safe and externally accessible place for inspection records and instructions.  Records holder is waterproof and is sealed from the inside of the container. An O-ring in the spring loaded cover seals the records compartment from the outside.  Inside dimensions: 3.37 x 12".  Outside dimensions:  4.5 dia x 12.75". Installation hole is 4.015" diamter. Also available in 14.75" depth.

To obtain a quote on Hardigg Rackmount Cases, please use our Quotation form to submit your request or call 1-800-636-1690 to speak with a Case Sales Specialist

Copyright © 1996 - 2004  Root International, Inc. All rights reserved. Information in this document  is subject to change without notice. Other products and companies referred to herein are trademarks / registered trademarks of their respective companies / mark holders.

Cases plastic shipping Hardigg rackmount military case for shipping and travel. Hardigg rotomolded plastic cases. Storm injection molded plastic containers. Laptop computer attaches. ATA roadcase flightcase. GSA sales.